FlashOnline R4

Nicht vorrätig
Lieferzeit je nach Hersteller und Verfügbarkeit
Normaler Preis CHF 275.00
Standard
Noch kein BMW ausgewählt

Wähle dein Fahrzeug im Katalog aus, um die Passform zu prüfen.

Passt dieses Teil zu deinem BMW?

Schick uns Modell, Motorisierung und wenn möglich die VIN.

Lieferzeit: abhängig von Hersteller und Verfügbarkeit – vor der Bestellung gerne kurz anfragen.
Teile- oder Einbauanfrage mit VIN
Product details
  • Verkäufer CobraRTP

Fragen zur Passform oder zum Produkt?

Jetzt kurz anfragen

FlashOnline — universal flash memory emulator 28Fxxx/29Fxxx, which allows you to programming the standard ECU in real time mode!

Features:

  • Live editing of the ECU firmware in real time, even while the engine is running!
  • Official support in TunerPro RT
  • Also can working with any software such as WinOLS, RomRaider, etc. through CobraRTP Utility.
  • Live map tracing in TunerPro RT
  • Remote connection via Bluetooth interface (if provided)
  • Store and switch 2 different firmwares.
  • Can be installed in an ECU case - the device is smaller than a credit card! 

Standart kit:

  • FlashOnline
  • extension cable.
  • SOP-44 adapter (2pcs.)
  • CobraRTP sticker
    Note: USB-mini cable is not included, must be purchased separately.

Compatible ECUs

Flash memory 28F200, 28F400 / 29F200, 29F400, 29F800 (SOP-44 only). CPUs: Infineon (Siemens) C167 (C166), ST ST10F273, ST10F275, Motorola ZC439512, ZC439615.

  • Siemens  MS41.0, MS41.1, MS41.2, MS42, MS43, MSS52, MSS54, SIMK31-43, MS5150, EMS2000, GS20, Simos 7.1/3PG/3.3, Simtec 75.1/75.5
  • Bosch ME2.0, ME2.8, ME3.8.3, M5.2.1, ME7.1, ME7.1.1, ME7.2, ME7.4.4, ME7.4.6, ME7.5, ME7.9.6, ME7.9.7, MP7, EDC15 (P/P+/C4/C6/VM), MED7.6.2
  • General Motors (GM) engines: LS1, LS2, LS3, LS6 LS7 ECUs: P01, E37, E38 (Corvette, Camaro, Firebird 1997 – 2011*) 
This list presents some of the supported ECUs, the list is wider and limited only by the type of memory installed in the ECU.

FlashOnline has been tested with the following ECUs:

Siemens MS41, MS42, MS43, MSS54, MS5150, 5WK (GS20), 5WY1857
Bosch ME2.8, ME3.8.3, M5.2.1, ME7.1, ME7.1.1, ME7.2, ME7.5, EDC15C6, EDC15P+, EDC15VM

How do I know if my ECU is compatible?

To do this, you need to open the ECU and make sure that one of the supported ROM types is installed: