Brake Cooling Complete Kit suitable for F87 M2 Competition / CS BMW SPEED Engineering Front Axle

To guide the air to the brake ventilation outlet, a suitable inlet is essential. The M2 Competition already has inlet ducts in the front bumper ex works, but these end in the middle of the wheel arch.

To prevent the air from swirling randomly in the wheel arch, we have developed an extension of the air duct, which can be installed with minimal effort and guides the air around the wheel, connecting it to the outlet via a 40 cm long hose (per side).

Backing Plates

The matching backing plates with a connection for central air inflow.

We utilize the channeling of the airflow to the center of the brake disc to exploit the turbine effect for cooling the disc from the inside. We specifically direct the air at an angle to avoid scattering losses and to use the available air volume with maximum efficiency.

Due to the lightweight construction combined with powder-coated aluminum, the component is sufficiently strong, yet light and insensitive.

Scope of delivery:

• Air ducts inlet for the front axle 1x left 1x right with connection for 51 mm air hose
• 2x mounting screws
• Backing plates for the front axle 1x left 1x right with connection for 51 mm air hose
• 1x air hose (1 meter)
• 4x hose clamps

Suitable for the following vehicles:

• BMW F87 M2 Competition,
• BMW M2 CS
• The kit for the "normal" M2 can be found here

NOTE:
If we do not explicitly state a parts certificate or a general operating permit (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Act (StVO) and thus invalidates the operating permit if no registration according to § 21 StVO is carried out!

Please note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.