{"title":"SPEED Engineering","description":null,"products":[{"product_id":"bremsenkuhlung-komplettset-passend-fur-f87-m2-competition-cs-bmw-speed-engineering-vorderachse","title":"Brake Cooling Complete Kit suitable for F87 M2 Competition \/ CS BMW SPEED Engineering Front Axle","description":"\u003cp\u003eTo guide the air to the brake ventilation outlet, a suitable inlet is essential. The \u003cstrong\u003eM2 Competition\u003c\/strong\u003e already has inlet ducts in the front bumper ex works, but these end in the middle of the wheel arch.\u003c\/p\u003e\n\u003cp\u003eTo prevent the air from swirling randomly in the wheel arch, we have developed an extension of the air duct, which can be installed with minimal effort and guides the air around the wheel, connecting it to the outlet via a 40 cm long hose (per side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacking Plates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matching backing plates with a connection for central air inflow.\u003c\/p\u003e\n\u003cp\u003eWe utilize the channeling of the airflow to the \u003cstrong\u003ecenter of the brake disc\u003c\/strong\u003e to exploit the turbine effect for cooling the disc from the inside. We specifically direct the air at an angle to avoid scattering losses and to use the available air volume with maximum efficiency.\u003c\/p\u003e\n\u003cp\u003eDue to the lightweight construction combined with powder-coated aluminum, the component is sufficiently strong, yet light and insensitive.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir ducts inlet for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e2x mounting screws\u003c\/li\u003e\n\u003cli\u003eBacking plates for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e1x air hose (1 meter)\u003c\/li\u003e\n\u003cli\u003e4x hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2 Competition,\u003c\/li\u003e\n\u003cli\u003eBMW M2 CS\u003c\/li\u003e\n\u003cli\u003eThe kit for the \"normal\" M2 can be found \u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-m\/bmw-m2\/bremsenkuehlung-bmw-m2-f87-komplettset-speed-engineering\/\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"custom-content\"\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly state a parts certificate or a general operating permit (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Act (StVO) and thus invalidates the operating permit if no registration according to § 21 StVO is carried out!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53969540383049,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/55169_Burkhart_Engineering_Bremsenkuehlung_Komplettset_F87_M2_Competition_CS_BMW_1_1280_neu.jpg?v=1772570802"},{"product_id":"elektrik-kit-passend-fur-elektrische-bmw-oem-laufschienen-g8x-f2x-f3x-f8x-e8x-e9x-m2-m3-m4-m140i-m235i","title":"Electrical kit suitable for electric BMW OEM seat rails G8x F2x F3x F8x E8x E9x M2 M3 M4 M140i M235i","description":"\u003cp\u003eElectric Expansion Kit suitable for\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eelectric BMW OEM seat rails\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGx Fx E8x E9x M2 M3 M4 M140i M235i\u003c\/p\u003e\n\u003cp\u003eThe easiest way to install a Recaro Pole Position in a BMW is clearly defined with the following article:\u003cbr\u003e\u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-ag\/bmw-1er\/speed-seitenadapter-oem-laufschienen-passend-fuer-e8x-e9x-f8x-g8x-m2-m3-m4-bmw\/\"\u003eSide adapter article suitable for BMW OEM seat rail\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, in this product description, you will find information that these adapters only work with BMW's mechanical seat rail. Now we have\u003cbr\u003edeveloped a kit so you can use exactly these adapters with electric seat rails. With the easy-to-retrofit Electric Kit, you control the existing motor\u003cbr\u003evia a switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the advantages?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou sit centrally in front of the steering wheel with the Pole Position\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eLow cost, no extra seat console and no extra seat rail necessary\u003c\/li\u003e\n\u003cli\u003eUse of OEM components\u003c\/li\u003e\n\u003cli\u003eAll heavy components are replaced with the OEM seat, and only a single actuator motor and the seat rail remain\u003c\/li\u003e\n\u003cli\u003eThe seat belt buckle remains in place with its attachment, and you can continue to use your OEM belt\u003c\/li\u003e\n\u003cli\u003eUpgrade to 6-point belts? No problem\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElectric Kit switch with cable connections\u003c\/li\u003e\n\u003cli\u003eCable ties\u003c\/li\u003e\n\u003cli\u003e*Please note, the side adapters are not included and must be ordered separately*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis item is suitable for\u003c\/strong\u003e\u003cbr\u003eThis is an additional item for the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-ag\/bmw-1er\/speed-seitenadapter-oem-laufschienen-passend-fuer-e8x-e9x-f8x-g8x-m2-m3-m4-bmw\/\"\u003eside adapters\u003c\/a\u003e, which are compatible with the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efollowing models\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e:\u003c\/p\u003e\n\u003cp\u003eAll BMW F-models\u003cbr\u003eAll BMW G-models\u003cbr\u003eE92 M3\u003cbr\u003eE90 M3\u003cbr\u003eE82 1 Series M\u003c\/p\u003e\n\u003cp\u003eWe explicitly point out that none of our products offered for sale are\u003cbr\u003eoriginal vehicle parts from vehicle manufacturers BMW AG, M GmbH, MINI, VAG, or other vehicle manufacturers. The naming of vehicle brands and models is only for product identification and their assignment to the appropriate vehicle type.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"custom-content\"\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly write about a partial certificate or a general operating permit (ABE) in the product text, it is a motorsport item that is not approved under the German Road Traffic Act (StVO), and therefore the operating permit expires if no registration according to § 21 StVO is made!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53970684838217,"sku":null,"price":81.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/55269_Burkhart_Engineering_Elektrik_Kit_passend_fuer_elektrische_BMW_OEM_Laufschienen_G8x_F2x_F3x_F8x_E8x_E9x_M2_M3_M4_M140i_M235i_1_1280.jpg?v=1772576878"},{"product_id":"bremsenkuhlung-komplettset-passend-fur-f87-m2-competition-cs-bmw-speed-engineering-vorderachse-1","title":"Brake Cooling Complete Kit suitable for F87 M2 Competition \/ CS BMW SPEED Engineering Front Axle","description":"\u003cp\u003eTo transport air to the brake ventilation outlet, a suitable inlet is essential. The \u003cstrong\u003eM2 Competition\u003c\/strong\u003e already has inlet ducts in the front bumper ex works, but these end in the middle of the wheel arch.\u003c\/p\u003e\n\u003cp\u003eTo prevent the air from swirling randomly in the wheel arch, we have developed an extension of the air duct that can be installed with minimal effort. It guides the air around the wheel and connects to the outlet via a 40 cm long hose (per side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacking plates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe matching backing plates with a connection for central air flow.\u003c\/p\u003e\n\u003cp\u003eWe utilize the channeling of the airflow to the \u003cstrong\u003ecenter of the brake disc\u003c\/strong\u003e to exploit the turbine effect for cooling the disc from the inside. We specifically direct the air at an angle to avoid scattering losses and to use the available air volume as efficiently as possible.\u003c\/p\u003e\n\u003cp\u003eDue to the lightweight construction combined with powder-coated aluminum, the component is sufficiently strong, lightweight, and robust.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir duct inlets for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e2x mounting screws\u003c\/li\u003e\n\u003cli\u003eBacking plates for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e1x air hose (1 meter)\u003c\/li\u003e\n\u003cli\u003e4x hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2 Competition,\u003c\/li\u003e\n\u003cli\u003eBMW M2 CS\u003c\/li\u003e\n\u003cli\u003eThe kit for the \"normal\" M2 can be found \u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-m\/bmw-m2\/bremsenkuehlung-bmw-m2-f87-komplettset-speed-engineering\/\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"custom-content\"\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly state in the product text that a parts certificate or a general operating permit (ABE) is included, this is a motorsport item that is not approved under the German Road Traffic Licensing Regulations (StVO) and therefore the operating permit expires if no registration is made in accordance with § 21 StVO!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53970749948233,"sku":null,"price":400.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/55169_Burkhart_Engineering_Bremsenkuehlung_Komplettset_F87_M2_Competition_CS_BMW_1_1280_neu_87baf2c3-8858-4fb6-9d9c-657aeeafba63.jpg?v=1772577332"},{"product_id":"seitenadapter-oem-laufschienen-passend-fur-e8x-e9x-f8x-g8x-m2-m3-m4-bmw-speed-engineering","title":"Side Adapters OEM Seat Rails suitable for E8x E9x F8x G8x M2 M3 M4 BMW Speed Engineering","description":"\u003cp\u003e\u003cstrong\u003eRecaro Pole Position side adapters suitable for BMW OEM slide rails Gx Fx E8x E9x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA seat mounting is primarily a safety-relevant component, and it was designed by us as precisely that. Breakages and the shape of the components are not arbitrarily chosen but are based on the results of calculations and simulations of stress distribution under load.\u003c\/p\u003e\n\u003cp\u003eEach of our components has undergone FEM simulation to primarily ensure safety and consequently optimize weight.\u003c\/p\u003e\n\u003cp\u003eThis solution makes it possible to mount a \u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/recaro-schalensitz-pole-position-abe\/\"\u003eRecaro Pole Position\u003c\/a\u003e to the original slide rail of a BMW F-series. This only applies to mechanical slide rails. For electric slide rails, we offer our \u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/elektrik-kit-passend-fuer-elektrische-bmw-oem-laufschienen-g8x-f2x-f3x-f8x-e8x-e9x-m2-m3-m4-m140i-m235i\/\"\u003eelectric kit\u003c\/a\u003e in our shop.\u003c\/p\u003e\n\u003cp\u003eThis seat mounting is designed to be bolted with 4 screws like the original seat, and the original bolts can also be reused. A carefully considered center alignment in front of the steering wheel ensures that your Pole Position is not positioned off-center. Only the seat height is a variable that is up to you. The double-row drillings allowed us to refine the height adjustment.\u003c\/p\u003e\n\u003cp\u003eWith this system, an additional seat console is not required, and you benefit from the rigidity of the BMW OEM slide rail. This, in turn, offers advantages during individual approval, as it benefits from every series part and thus simplifies registration.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x adapter left\u003c\/li\u003e\n\u003cli\u003e1x adapter right\u003c\/li\u003e\n\u003cli\u003e1x package of mounting material\u003c\/li\u003e\n\u003cli\u003eOperating instructions on the product page\u003c\/li\u003e\n\u003cli\u003eMaterial expertise upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur sets are designed so that Recaro slide rails can also be mounted.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll BMW F models\u003c\/li\u003e\n\u003cli\u003eAll BMW G models\u003c\/li\u003e\n\u003cli\u003eE92 M3\u003c\/li\u003e\n\u003cli\u003eE90 M3\u003c\/li\u003e\n\u003cli\u003eE82 1 Series M\u003c\/li\u003e\n\u003cli\u003eFor use with electric consoles, please order \u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-ag\/bmw-1er\/elektrik-kit-passend-fuer-elektrische-bmw-oem-laufschienen-g8x-f2x-f3x-f8x-e8x-e9x-m2-m3-m4-m140i-m235i\/\"\u003ethis kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"custom-content\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly mention a parts certificate (Teilegutachten) or a general operating permit (ABE) in the product text, it is a motorsport item that is not approved under the German Road Traffic Licensing Regulations (StVZO) and thus the operating permit expires if no registration according to § 21 StVZO is carried out!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53979509850441,"sku":null,"price":173.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54260_Seitenadapter_OEM_Laufschienen_passend_fuer_E8x_E9x_F8x_G8x_M2_M3_M4_BMW_Speed_Engineering_2_1280-1024x1024.jpg?v=1772743122"},{"product_id":"bremsenkuhlung-komplettset-passend-fur-m2-f87-bmw","title":"Brake Cooling Complete Set suitable for M2 F87 BMW","description":"\u003cp\u003eTo transport air to the brake ventilation outlet, a suitable inlet is essential.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eF87 M2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edoes not have intake ducts in the front bumper from the factory like the Competition, so we have utilized the airflow behind the side radiators. To prevent the air from swirling randomly in the wheel arch after passing the radiators, we developed an air duct that can be installed with minimal effort. It guides the air around the wheel and connects an outlet via a 40 cm long hose (per side) to effectively cool the brakes. Our tests have shown that this does not create significant back pressure behind the radiator, and in cases of extreme speeds and increasing pressure, the ducts are equipped with lateral ventilation slots.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir Duct Outlet:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe suitable backing plates with a connection for central air flow.\u003c\/p\u003e\n\u003cp\u003eWe channel the airflow to the center of the brake disc to utilize the turbine effect for cooling the disc from the inside. We specifically direct the air at an angle to avoid dispersion losses and maximize the efficiency of the available air volume.\u003c\/p\u003e\n\u003cp\u003eDue to its lightweight construction combined with powdered aluminum, the component is sufficiently strong yet light and robust.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir duct inlets for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e2x mounting screws\u003c\/li\u003e\n\u003cli\u003eBacking plates for the front axle 1x left 1x right with connection for 51 mm air hose\u003c\/li\u003e\n\u003cli\u003e1x air hose (1 meter)\u003c\/li\u003e\n\u003cli\u003e4x hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2 with N55 engine (not suitable for Competition and CS)\u003c\/li\u003e\n\u003cli\u003eThe kit for the Competition and CS can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/burkhart-engineering.com\/shop\/bmw\/bmw-m\/bmw-m2\/bremsenkuehlung-komplettset-m2-competition-und-cs-f87-bmw\/\"\u003ehere\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"custom-content\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly mention a parts certificate or a general operating permit (ABE) in the product text, it is a motorsport item that is not approved under the German Road Traffic Licensing Regulations (StVO) and therefore the operating permit expires if no registration according to § 21 StVO is carried out!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53979684471113,"sku":null,"price":399.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/55147_Burkhart_Engineering_Bremsenkuehlung_Komplettset_M2_F87_BMW_1_1280.jpg?v=1772747292"},{"product_id":"universelle-bremsenkuhlung-fur-die-vorderachse-und-hinterachse-speed-engineering","title":"Universal brake cooling for front and rear axle, Speed Engineering","description":"\u003cdiv class=\"vc_row wpb_row vc_row-fluid\"\u003e\n\u003cdiv class=\"wpb_column vc_column_container vc_col-sm-12\"\u003e\n\u003cdiv class=\"vc_column-inner\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003e\u003cstrong\u003eFor example, Porsche installs it on their vehicles ex works, but what about the rest?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe universal solution for most vehicles!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eMost vehicles only have hinted cooling on the front axle and usually no cooling at all on the rear axle. Porsche, among others, has recognized that brake cooling is essential for the performance, durability, and lifespan of the brake and its components.\u003c\/p\u003e\n\u003cp\u003eIt is not possible to cover every vehicle and every axle with a tailor-made solution, which is why we have developed universal cooling and tested it intensively on various vehicles over several months.\u003c\/p\u003e\n\u003cp\u003eThe following diagram shows the measurement on the rear axle with the backing plate still installed:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_row wpb_row vc_row-fluid\"\u003e\n\u003cdiv class=\"wpb_column vc_column_container vc_col-sm-12\"\u003e\n\u003cdiv class=\"vc_column-inner\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_single_image wpb_content_element vc_align_center\"\u003e\n\u003cfigure class=\"wpb_wrapper vc_figure\"\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cimg decoding=\"async\" width=\"554\" height=\"632\" src=\"https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280.jpg\" class=\"vc_single_image-img attachment-large entered lazyloaded\" alt=\"Bremsenkühlung\" title=\"55438 - Universelle Bremsenkühlung für die Vorderachse und Hinterachse, Speed Engineering 3 1280\" data-lazy-srcset=\"https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280.jpg 554w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-263x300.jpg 263w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-150x171.jpg 150w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-64x73.jpg 64w\" data-lazy-sizes=\"(max-width: 554px) 100vw, 554px\" data-lazy-src=\"https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280.jpg\" data-ll-status=\"loaded\" sizes=\"(max-width: 554px) 100vw, 554px\" srcset=\"https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280.jpg 554w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-263x300.jpg 263w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-150x171.jpg 150w, https:\/\/49b3eac8.delivery.rocketcdn.me\/wp-content\/uploads\/2023\/07\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-3-1280-64x73.jpg 64w\"\u003e\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_row wpb_row vc_row-fluid\"\u003e\n\u003cdiv class=\"wpb_column vc_column_container vc_col-sm-12\"\u003e\n\u003cdiv class=\"vc_column-inner\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003cp\u003eA difference of up to 50°C in the peak over the measurement range can be seen here. However, if holes are drilled in the backing plate or it is removed, maximum performance is achieved with a delta of up to 200°C.\u003c\/p\u003e\n\u003cp\u003eThe geometry of the components is designed to fit most wishbones and can be installed plug-and-play with cable ties without a lift or removing the wheels. For some vehicles, minor adjustments to the cooling ducts may be necessary. The inlets are designed to be flat so that they do not represent the lowest point of the vehicle and redirect the airflow under the vehicle precisely to the center of the rotating wheel.\u003c\/p\u003e\n\u003cp\u003eThe components are made of PA12 plastic and already contain slots for fastening. The continuous tapering between the inlet and the outlet leads to an acceleration of the airflow at a constant volume and thus to a targeted outflow of air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have successfully tested the fitting accuracy on the following vehicles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eall BMW rear axles\u003c\/li\u003e\n\u003cli\u003eToyota Supra MK5 rear axle\u003c\/li\u003e\n\u003cli\u003eVW Golf 4,5,6,7,8 front axle + rear axle\u003c\/li\u003e\n\u003cli\u003eAudi TT,S,RS rear axle\u003c\/li\u003e\n\u003cli\u003eScirocco (R) front axle + rear axle\u003c\/li\u003e\n\u003cli\u003eAudi R8 front axle + rear axle\u003c\/li\u003e\n\u003cli\u003eRenault Clio RS front axle\u003c\/li\u003e\n\u003cli\u003eFord Fiesta ST front axle\u003c\/li\u003e\n\u003cli\u003eFord Focus ST+RS front axle + rear axle\u003c\/li\u003e\n\u003cli\u003eToyota GR86, GT86 front axle + rear axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003e Included in delivery:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Universal Brake Cooling L\u003c\/li\u003e\n\u003cli\u003e1x Universal Brake Cooling R\u003c\/li\u003e\n\u003cli\u003e6x cable ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eThis item is suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMost common vehicles, sometimes with minor adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003eMotorsport parts without road approval. We explicitly point out that none of our products offered for sale are original vehicle parts from vehicle manufacturers BMW AG, M GmbH, MINI, VAG, or other vehicle manufacturers. The naming of vehicle brands and models merely serves to identify the product and assign it to the appropriate vehicle type.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp class=\"custom-content\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly mention a parts certificate (Teilegutachten) or a general operating permit (ABE) in the product text, it is a motorsport item that is not approved under the German Road Traffic Licensing Regulations (StVO) and therefore the operating license expires if no registration is made in accordance with § 21 StVO!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":53979720745289,"sku":null,"price":100.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/55438-Universelle-Bremsenkuehlung-fuer-die-Vorderachse-und-Hinterachse-Speed-Engineering-1-1280.jpg?v=1772748837"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-e9x-m3-bmw","title":"Rear axle brake cooling suitable for E9x M3 BMW","description":"\u003cp\u003eOn our race cars, we observed that the inside of the brake disc (despite brake upgrades) on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003erear axle\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003egets extremely hot. Apart from the excessive heat generation, an extreme difference between the inner and outer side leads to uneven wear patterns on the brake pads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur solution works\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ePlug \u0026amp; Play\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand requires no modifications to the vehicle, no installation of hoses, clamps, or other accessories. Air is directed through a flow channel directly to the inside of the rim. To increase the air volume, we use an additional duct system to promote further cool air through the vacuum in the channel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDismantling the dust shield is expressly recommended!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following vehicles: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW E9x M3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"custom-content\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003eIf we do not explicitly state in the product text that a partial certificate (Teilegutachten) or a general operating permit (ABE) is included, this is a motorsport item that is not approved under the German Road Traffic Act (StVO) and therefore invalidates the operating license if no registration is made in accordance with § 21 StVO!\u003c\/p\u003e\n\u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":54042890568009,"sku":null,"price":126.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54498_Burkhart_Engineering_verstellbare_Domlager_BMW_F20_F21_F22_F30_F31_F32_1_1280-2_a2c606ef-5da3-4317-9997-8cf33b715e1d.png?v=1773778358"},{"product_id":"bremsenkuhlung-hinterachse-passend-fur-f87-g87-m2-f8x-g8x-m3-m4-bmw-speed-engineering","title":"Rear Axle Brake Cooling suitable for F87 G87 M2 | F8x G8x M3 M4 BMW SPEED Engineering","description":"\u003cp\u003eOn our race cars, we observed that the inner side of the brake disc on the rear axle (despite a brake upgrade) developed extreme temperatures. Apart from the excessive heat development, an extreme difference between the inner and outer side leads to uneven wear of the brake pads.\u003c\/p\u003e\n\u003cp\u003eOur solution is plug \u0026amp; play and requires\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eno modifications to the vehicle\u003c\/strong\u003e. No hose, clamps, or other accessories need to be installed, making the system wear-free. We utilize the original mounting points on the control arm. Air is guided through a flow channel directly to the inside of the rim.\u003c\/p\u003e\n\u003cp\u003eRemoval of the dust shield is strongly recommended!\u003c\/p\u003e\n\u003cp\u003e____\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2\u003c\/li\u003e\n\u003cli\u003eBMW F80 M3\u003c\/li\u003e\n\u003cli\u003eBMW F82 F83 M4\u003c\/li\u003e\n\u003cli\u003eBMW G87 M2\u003c\/li\u003e\n\u003cli\u003eBMW G80, G81 M3\u003c\/li\u003e\n\u003cli\u003eBMW G82, G83 M4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SPEED Engineering","offers":[{"title":"Default Title","offer_id":54237451682121,"sku":null,"price":221.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/Bremsenkuehlung-Hinterachse-passend-fuer-F87-G87-M2-F8x-G8x-M3-M4-BMW-SPEED-Engineering-1.webp?v=1776712739"}],"url":"https:\/\/bimituning.com\/en\/collections\/speed-engineering.oembed","provider":"Bimituning","version":"1.0","type":"link"}