{"title":"Gearbox E46","description":"\u003cp data-start=\"76\" data-end=\"396\"\u003e \u003cstrong data-start=\"76\" data-end=\"113\"\u003eGearbox – Power meets precision\u003c\/strong\u003e\u003cbr data-start=\"113\" data-end=\"116\"\u003e The transmission is the link between the engine and the drivetrain—crucial for acceleration, efficiency, and driving pleasure. In this category, you'll find high-quality transmission components and spare parts that ensure precise shifting, high durability, and a long service life.\u003c\/p\u003e\n\n \u003cp data-start=\"398\" data-end=\"558\"\u003eWhether it's a stock replacement, a sporty optimization, or a performance upgrade – with the right transmission parts, you can optimally bring the power of your engine onto the road.\u003c\/p\u003e","products":[{"product_id":"smg-2-hydraulikeinheit-reparatur-set-fur-bmw-e46-m3-csl","title":"SMG 2 hydraulic unit repair kit for BMW E46 M3\/CSL","description":"\u003cp\u003e With the Burkhart Engineering repair kit, your SMG 2 hydraulic unit (BMW part number: 21 53 2 229 715 \/ 21532229715) will be ready for summer again!\u003c\/p\u003e\n\n\u003cp\u003e Are the following error messages, among others, stored in the error log?\u003c\/p\u003e\n\n\u003cp\u003e • 53 (0x35) Pressure band undershot HE\u003cbr\u003e • 55 (0x37) Hydraulic unit switching frequency\u003cbr\u003e • 56 (0x38) Duty cycle hydraulic unit\u003cbr\u003e • 57 (0x39) Hydraulic unit misuse\u003c\/p\u003e\n\n \u003cp\u003eIn most cases, the cause is a worn-out electric motor that drives the hydraulic pump in the hydraulic unit. In addition, gap losses in the hydraulic system increase dramatically at high temperatures. When many hydraulic consumers are active (clutch slave cylinder and transmission actuator), the hydraulic unit can no longer keep up with the pressure buildup. We have developed our Burkhart Engineering High Performance Hydraulic Oil for this purpose. The required system pressure is built up up to 25% faster than with standard Pentosin CHF 11s.\u003c\/p\u003e\n\n\u003cp\u003e The pump drive may be responsible for the following fault pattern:\u003c\/p\u003e\n\n\u003cp\u003e • Transmission warning light comes on\u003cbr\u003e • Engine light comes on\u003cbr\u003e • Gears are removed\u003cbr\u003e • Gears can no longer be engaged\u003c\/p\u003e\n\n \u003cp\u003eThe worn-out original motor can be replaced with our repair motor using a plug-and-play approach. The replacement motor is equipped with the required pins and seals and can be directly plugged into the original BMW wiring harness. It's a replacement part with OEM quality. It's the ideal alternative to replace the hydraulic unit.\u003c\/p\u003e\n\n\u003cp\u003e The unlocking tool for the exchange is also available in our shop.\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the following vehicles:\u003c\/p\u003e\n\n\u003cp\u003e • BMW E46 M3 incl. CSL\u003cbr\u003e • Wiesmann MF3\u003c\/p\u003e\n\n\u003cp\u003e Scope of delivery:\u003c\/p\u003e\n\n\u003cp\u003e • New replacement engine\u003cbr\u003e • New temperature sensor\u003cbr\u003e • High performance hydraulic oil\u003cbr\u003e • High-performance grease\u003c\/p\u003e\n\n\u003cp\u003e The following video shows the removal and installation:\u003c\/p\u003e\n\n \u003cp\u003eThe repair kit can only achieve the desired improvement in an otherwise fully functional unit. If, for example, the piston accumulator is defective or no longer has the required preload pressure, it must also be replaced. You can find instructions for checking the preload pressure here.\u003c\/p\u003e\n\n\u003cp\u003e *** INSTALLATION INSTRUCTIONS ***\u003c\/p\u003e\n\n\u003cp\u003e Please do not operate the motor outside the hydraulic unit! Furthermore, the motor should not be removed after installation. Due to the tight fit of the motor, it may be damaged during re-removal. If you have any questions about the product, we are happy to help.\u003c\/p\u003e\n\n\u003cp\u003e A NOTICE:\u003c\/p\u003e\n\n\u003cp\u003e If we do not explicitly mention a parts certificate or a general operating permit (ABE) in the product text, it is a motorsport article that is not approved under the Road Traffic Regulations (StVO) and therefore the operating permit will expire if no entry is made in accordance with Section 21 StVO!\u003c\/p\u003e\n\n \u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the road safety of the vehicle.\u003c\/p\u003e","brand":"Burkhart Engineering","offers":[{"title":"Default Title","offer_id":52902773326153,"sku":null,"price":467.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54160_Burkhart_Engineering_Reparatur-Kit_SMG_Hydraulikeinheit_1_1280-1200x1200.jpg?v=1757444083"},{"product_id":"antriebswellengelenk-antriebswelle-getriebeseitig-passend-fur-m3-e36-e46-inkl-csl-bmw-1","title":"Drive shaft joint drive shaft gearbox side suitable for M3 E36 E46 incl. CSL BMW","description":"\u003cp\u003e OE-quality joint kit for the drive shaft of the BMW M3 E36 and M3 E46, including CSL (transmission side). Suitable for left and right drive shafts. Includes M10 bolt set.\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the following vehicles:\u003cbr\u003e - BMW E36 M3\u003cbr\u003e - BMW E46 M3 incl. CSL\u003c\/p\u003e","brand":"Burkhart Engineering","offers":[{"title":"Default Title","offer_id":52917348827465,"sku":null,"price":93.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54216_Burkhart_Engineering_Antriebswellengelenk_getriebeseitig_BMW_E36_E46_M3_1_1280neu2_39e79487-cfa7-4ebb-94ca-4c0e48451331.jpg?v=1757480423"},{"product_id":"getriebelager-set-passend-fur-e30-e36-e46-e9x-e8x-bmw","title":"Gearbox mount set suitable for E30 E36 E46 E9x E8x BMW","description":"\u003cp\u003e New OEM-quality transmission mounts with improved shiftability, as the old ones are often worn out.\u003c\/p\u003e\n\n\u003cp\u003e Attention: does not fit E9X M3 models!\u003c\/p\u003e\n\n\u003cp\u003e Replaces the following OE numbers:\u003cbr\u003e - 22316799331\u003cbr\u003e - 23711175939\u003cbr\u003e - 23711175424\u003cbr\u003e - 23701141614\u003c\/p\u003e\n\n\u003cp\u003e Scope of delivery:\u003cbr\u003e - Two bearings for one vehicle\u003c\/p\u003e\n\n \u003cp\u003eNote: If the product description does not explicitly mention a parts certificate or a general operating permit (ABE), it is a motorsport product that is not approved under the German Road Traffic Act (StVVO). Therefore, the operating permit will be voided if no registration is made in accordance with Section 21 of the StVZO (German Road Traffic Licensing Regulations). Please note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the roadworthiness of the vehicle.\u003c\/p\u003e","brand":"Burkhart Engineering","offers":[{"title":"Default Title","offer_id":52919649698121,"sku":null,"price":48.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/getriebelager-set-passend-fuer-e30-e36-e46-e9x-e8x-bmw.jpg?v=1757869544"},{"product_id":"kupplungspin-messing-passend-fur-fast-alle-bmw-1","title":"Clutch pin brass suitable for almost all BMW","description":"\u003cp\u003e The clutch pin is made of brass instead of plastic to minimize wear.\u003c\/p\u003e\n\n\u003cp\u003e We chose brass as the material for the coupling bolts because it offers two decisive advantages over stainless steel.\u003c\/p\u003e\n\n\u003cp\u003e On the one hand, the brass alloy in question is rich in zinc, which is why this alloy is often used as a bearing material with good emergency running properties.\u003c\/p\u003e\n\n\u003cp\u003e The second advantage over stainless steel or steel is the wear on the release lever. We sensibly selected the material pairing so that the less expensive ball stud wears, while the more expensive release lever remains wear-free. Using a clutch stud made of steel or stainless steel reverses the intended wear direction. As a result, the stud remains intact, but the release lever wears. For this reason, we believe manufacturing it from brass makes sense, even if the material is somewhat more expensive.\u003c\/p\u003e\n\n \u003cp\u003eWhen installing the clutch pins, please use a new retaining spring and grease the head of the pin.\u003c\/p\u003e\n\n\u003cp\u003e Replaces BMW original part number 21511223328\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the following vehicles with manual transmission:\u003c\/p\u003e\n\n\u003cp\u003e • BMW E36 including M3\u003cbr\u003e • BMW E39 including M5\u003cbr\u003e • BMW E46 including M3 (also with SMG)\u003cbr\u003e • BMW E9x including M3\u003cbr\u003e • BMW F8x M2 M3 M4\u003c\/p\u003e\n\n\u003cp\u003e A NOTICE:\u003c\/p\u003e\n\n\u003cp\u003e If we don't explicitly mention a partial certificate or a general operating permit (ABE) in the product test, it is a motorsport product that is not permitted under the German Road Traffic Act (StVO). Registration under Section 21 of the StVO is not possible! We recommend installation by a qualified specialist workshop.\u003c\/p\u003e","brand":"Vierliter","offers":[{"title":"Default Title","offer_id":52920413585737,"sku":null,"price":27.9,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54338_Burkhart_Engineering_Messing_Kupplungspin_Kugelkopf_BMW_21511223328_1_1280-1-1200x1200_b3eb536b-1c46-4faa-8929-b0f06c965ad7.jpg?v=1758095497"},{"product_id":"kupplungs-kit-organisch-sinter-gefedert-inkl-einmassenschwungrad-passend-fur-e36-e46-m52-m54-240-mm-bmw","title":"Clutch kit organic \/ sintered spring including single mass flywheel suitable for E36 E46 M52 M54 240 mm BMW","description":"\u003cp\u003e Clutch kit for a BMW E36 or E46 with M50, M52, or M54 engines. Available with organic or sintered suspension and a single-mass flywheel.\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the following vehicles:\u003cbr\u003e - BMW E36 (M50, M52 or M54 engine)\u003cbr\u003e - BMW E46 (M52 or M54 engine)\u003c\/p\u003e\n\n\u003cp\u003e Flywheel properties:\u003cbr\u003e - Weight 5.5 kg\u003cbr\u003e - New starter wreath\u003cbr\u003e - Finely balanced\u003cbr\u003e - “plug and play” exchange \u003cbr\u003e- Chrome-moly steel (16MnCr5)\u003c\/p\u003e\n\n\u003cp\u003e Clutch kit features:\u003cbr\u003e - Max. transmittable engine torque: 320 Nm (organic) or 450+ Nm (sintered)\u003cbr\u003e - Torsion-sprung disc with organic pads or friction disc with 8 sintered pads\u003cbr\u003e - Including screw kit in 12.9 for crankshaft and clutch\u003cbr\u003e - incl. release bearing\u003c\/p\u003e\n\n\u003cp\u003e When converting to a single-mass flywheel (EMS), the transmission may become noisy when stationary. In addition to increasing engine speed, our Rattle-Fix transmission oil can also help alleviate this problem.\u003c\/p\u003e\n\n\u003cp\u003e NOTE: If we do not explicitly mention a parts certificate or a general operating permit (ABE) in the product text, it is a motorsport article that is not approved under the Road Traffic Regulations (StVO) and therefore the operating permit will expire if no entry is made in accordance with Section 21 StVO!\u003c\/p\u003e\n\n \u003cp\u003ePlease note that vehicle spare parts should only be installed by a qualified specialist workshop to ensure their proper function and the roadworthiness of the vehicle.\u003c\/p\u003e","brand":"PTB-Racing","offers":[{"title":"Organic \/ 5-speed \/ E36","offer_id":52968873001289,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true},{"title":"Organic \/ 5-speed \/ E46 (up to model year 2\/2003 10 teeth)","offer_id":52968873034057,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true},{"title":"Organic \/ 5-speed \/ E46 (from model year 3\/2003 22 teeth)","offer_id":52968873066825,"sku":null,"price":753.0,"currency_code":"CHF","in_stock":true},{"title":"Organic \/ 6-speed \/ E36","offer_id":52968873099593,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true},{"title":"Organic \/ 6-speed \/ E46 (up to model year 2\/2003 10 teeth)","offer_id":52968873132361,"sku":null,"price":680.0,"currency_code":"CHF","in_stock":true},{"title":"Organic \/ 6-speed \/ E46 (from model year 3\/2003 22 teeth)","offer_id":52968873165129,"sku":null,"price":753.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 5-speed \/ E36","offer_id":52968873197897,"sku":null,"price":767.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 5-speed \/ E46 (up to model year 2\/2003 10 teeth)","offer_id":52968873230665,"sku":null,"price":767.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 5-speed \/ E46 (from model year 3\/2003 22 teeth)","offer_id":52968873263433,"sku":null,"price":820.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 6-speed \/ E36","offer_id":52968873296201,"sku":null,"price":768.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 6-speed \/ E46 (up to model year 2\/2003 10 teeth)","offer_id":52968873328969,"sku":null,"price":820.0,"currency_code":"CHF","in_stock":true},{"title":"8 sinter pads \/ 6-speed \/ E46 (from model year 3\/2003 22 teeth)","offer_id":52968873361737,"sku":null,"price":820.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54451_Burkhart_Engineering_Kupplungs-Kit_organisch_sinter_gefedert_Einmassenschwungrad_BMW_E36_E46_M52_M54_240mm_1_1280-1200x1200.png?v=1758186881"},{"product_id":"dichtungsset-magnetventil-hydraulikeinheit-smg-2-passend-fur-e46-m3-inkl-csl-bmw","title":"Sealing set solenoid valve hydraulic unit SMG 2 suitable for E46 M3 incl. CSL BMW","description":"\u003cp\u003e Heat and oil resistant sealing set for a solenoid valve from the SMG 2 hydraulic unit of the BMW E46 M3 incl. CSL.\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the proportional directional control valves and proportional pressure control valves of the hydraulic unit on the SMG 2.\u003c\/p\u003e\n\n\u003cp\u003e Four sets are required to overhaul the entire hydraulic unit.\u003c\/p\u003e\n\n\u003cp\u003e Suitable for the following vehicles:\u003cbr\u003e - BMW E46 M3 incl. CSL\u003c\/p\u003e\n\n \u003cp\u003eNote: If the product description does not explicitly mention a parts certificate or a general operating permit (ABE), this is a motorsport product that is not approved under the German Road Traffic Regulations (StVO). Therefore, the operating permit will be voided if no registration is made in accordance with §21 StVZO. Please have the vehicle spare part installed by a qualified specialist workshop to ensure proper function and road safety.\u003c\/p\u003e","brand":"Burkhart Engineering","offers":[{"title":"Default Title","offer_id":52929586954569,"sku":null,"price":11.15,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/files\/54541_Burkhart_Engineering_Dichtungset_Magnetventil_Hydraulikeinheit_SMG_2_E46_M3_CSL_1_1280-1-1200x1200.png?v=1758199613"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/4559\/1113\/collections\/Gaerbox.jpg?v=1757779918","url":"https:\/\/bimituning.com\/en\/collections\/gearbox-e46.oembed","provider":"Bimituning","version":"1.0","type":"link"}